飞行器再入大气层通信黑障的消除方法

文章通过分析等离子体鞘层与电磁波的相互作用,考察了通信黑障的产生原理及其影响,详细介绍了各种通信黑障消除方法的基本原理及其优缺点,包括改变空气动力学形状、亲电子物质注入、磁开窗、引入交叉电磁场、提高发射功率和入射波频率以及采用Raman散射通信等,为进一步开展通信黑障消除方法的应用研究指明了方向。     

软件GNSS信号模拟器架构与中频信号生成

软件GNSS(Global Navigation Satellite Systems)信号模拟器对于GNSS接收机的高效研发将做出重要贡献,因其结构灵活、开放性以及低成本.以GPS/Galileo组合系统为例,讨论了软件GNSS中频信号模拟器的架构,主要功能模块包括卫星星座仿真、接收机轨迹生成、传播通道特性仿真(包括电离层模型、对流层模型、多径模型等)、数字中频信号生成.在此基础上,着重阐述了数字中频信号生成模块的实现,功率谱图及分析结果验证了所生成的信号,包括GPS L1 C/A,Galileo E1 CBOC(Composite Binary Offset Carrier),Galileo E5a和E5b信号.     

基于GNSS的高轨卫星定位技术研究

利用全球卫星导航系统(GNSS)进行导航定位具有全球、全天候、实时和高精度的优点,应用于高地球轨道(HEO)卫星的定位,能够提供精确的轨道和姿态确定,并且可以克服目前主要利用地面测控系统对HEO卫星进行定位的设备复杂、投资高等缺点,使得自主导航成为可能.本文对利用GNSS的高轨卫星定位相关技术进行了研究,分析了单一GNSS系统和多个GNSS组合系统的卫星可见性、动态性和几何精度因子(GDOP).通过仿真分析表明,利用组合GNSS系统并通过提高GNSS接收机灵敏度的方法,可以解决GNSS进行HEO卫星定位的相关问题,并能保证HEO卫星定位精度的要求.      

GNSS-R延迟映射接收机相关器设计

介绍基于Altera公司EP2S60 FPGA芯片的GNSS-R接收机相关器的设计与实现。根据反射信号的接收处理特点,相关器中反射通道在镜面反射点配置信息基础上滑动一定范围的码片数以及多普勒频移,以得到反射信号时延/多普勒二维相关功率。此外还重点介绍NCO模块、EMIF接口模块。试验结果表明本地码、载波生成准确,在DSP配置下相关器可正确得到反射信号相关功率。     

北斗三号系统卫星自主完好性监测技术

完好性对于全球卫星导航系统(GNSS)来说至关重要,关乎到其能否被放心应用。卫星自主完好性监测(SAIM)技术,是完好性监测技术发展的前沿趋势,国内外卫星导航系统均竞相发展。介绍了北斗三号系统SAIM技术设计与实现的重要意义,从功能设计和实现原理两个方面,阐述了北斗三号SAIM技术体制。针对SAIM实际在轨监测数据的正态分布特性服从程度和长期稳定性等问题,随机选取某一颗中圆轨道(MEO)卫星自2020年7月31日北斗三号系统正式开通服务以来至2021年7月31日连续1年期间的监测数据,得到真实在轨监测数据的分布特性。最后,提出了告警门限优化、分级告警策略设计、星历完好性自主监测等方面的后续发展必要性建议,旨在为北斗系统更好地为全球用户提供更优质的完好性服务提供参考。     

Compatibility of Terrestrial Reference Frames used in GNSS broadcast messages during an 8 week period of 2019

The operational Terrestrial Reference Frames (TRFs) realized through the evaluation of broadcast ephemerides for GPS, GLONASS, Galileo, BeiDou-2 and BeiDou-3 have been compared to IGS14, the TRF realized by the International GNSS Service (IGS). The TRFs realized by the GPS, GLONASS, Galileo, and BeiDou-2 and BeiDou-3 broadcast ephemerides are the orbital realizations of WGS 84 (G1762′), PZ90.11, GTRF19v01, and BDCS respectively. These TRFs are compared using up to 56 days of data (21 July-14 Sept 2019) at a 5 or 15-min rate. The operational TRFs are compared to IGS14 in a 7-parameter similarity (Helmert) transformation. Numerical results show that the operational GNSS TRFs differ from IGS14 at a level no greater than 4 cm for Galileo, 6 cm for GPS and BeiDou-3, 13 cm for GLONASS, and 48 cm for a limited set of BeiDou-2 Medium Earth Orbit (MEO) vehicles.     

Real-time zenith tropospheric delays in support of numerical weather prediction applications

The Geodetic Observatory Pecný (GOP) routinely estimates near real-time zenith total delays (ZTD) from GPS permanent stations for assimilation in numerical weather prediction (NWP) models more than 12 years. Besides European regional, global and GPS and GLONASS solutions, we have recently developed real-time estimates aimed at supporting NWP nowcasting or severe weather event monitoring. While all previous solutions are based on data batch processing in a network mode, the real-time solution exploits real-time global orbits and clocks from the International GNSS Service (IGS) and Precise Point Positioning (PPP) processing strategy. New application G-Nut/Tefnut has been developed and real-time ZTDs have been continuously processed in the nine-month demonstration campaign (February–October, 2013) for selected 36 European and global stations. Resulting ZTDs can be characterized by mean standard deviations of 6–10 mm, but still remaining large biases up to 20 mm due to missing precise models in the software. These results fulfilled threshold requirements for the operational NWP nowcasting (i.e. 30 mm in ZTD). Since remaining ZTD biases can be effectively eliminated using the bias-reduction procedure prior to the assimilation, results are approaching the target requirements in terms of relative accuracy (i.e. 6 mm in ZTD). Real-time strategy and software are under the development and we foresee further improvements in reducing biases and in optimizing the accuracy within required timeliness. The real-time products from the International GNSS Service were found accurate and stable for supporting PPP-based tropospheric estimates for the NWP nowcasting.     

Accuracy analysis of GNSS-IR snow depth inversion algorithms

In recent years, with the continuous development of Global Navigation Satellite System (GNSS), it has been applied not only to navigation and positioning, but also to Earth surface environment monitoring. At present, when performing GNSS-IR (GNSS Interferometric Reflectometry) snow depth inversion, Lomb-Scargle Periodogram (LSP) spectrum analysis is mainly used to calculate the vertical height from the antenna phase center to the reflection surface. However, it has the problem of low identification of power spectrum analysis, which may lead to frequency leakage. Therefore, Fast Fourier Transform (FFT) spectrum analysis and Nonlinear Least Square Fitting (NLSF) are introduced to calculate the vertical height in this paper. The GNSS-IR snow depth inversion experiment is carried out by using the observation data of P351 station in PBO (Plate Boundary Observatory) network of the United States from 2013 to 2016. Three algorithms are used to invert the snow depth and compared with the actual snow depth provided by the station 490 in the SNOTEL network. The observations data of L1 and L2 bands are respectively used to find the optimal combination between different algorithms further to improve the accuracy of GNSS-IR snow depth inversion. For L1 band, different snow depths correspond to different optimal algorithms. When the snow depth is less than 0.8 m, the inversion accuracy of NLSF algorithm is the highest. When the snow depth is greater than 0.8 m, the inversion accuracy of FFT algorithm is higher. Therefore, according to the different snow depth, a combined algorithm of NLSF + FFT is proposed for GNSS-IR snow depth inversion. Compared with the traditional LSP algorithm, the inversion accuracy of the combined algorithm is improved by 10%. For L2 band data, the results show that the accuracy of snow depth inversion of various algorithms do not change with the variations of snow depth. Among the three single algorithms, the inversion accuracy of FFT algorithm is better than that of LSP and NLSF algorithms.     

基于放电室均布模型的射频离子推力器研究

为了研究工作参数和结构参数对射频离子推力器放电性能的影响规律，通过开展放电室均布模型数值仿真和推力器性能试验，研究了射频离子推力器LRIT 40的放电机理和放电性能随结构参数和工作参数的变化规律。研究发现，减小长径比或增大工质流率、栅极电压及射频功率均能增大推力器束电流，改善推力器性能。通过分析试验结果和仿真结果得到，放电室均布模型可用于研究射频离子推力器的性能。     

A priori zenith wet delays in the analysis of VLBI CONT sessions

Tropospheric delay is one of the major sources of error in VLBI (Very Long Baseline Interferometry) analysis. The principal component of this error can be accurately computed through reliable surface pressure data —hydrostatic delay— yet there is also a small but volatile component —wet delay— which is difficult to be modelled a priori. In VLBI analysis, troposphere delay is typically modelled in the theoretical delays using Zenith Hydrostatic Delays (ZHD) and a dry mapping function. Zenith Wet Delay (ZWD) is not modelled but estimated in the analysis process. This work studies inter alia the impact of including external GNSS estimates to model a priori ZWD in VLBI analysis, as well as other models of a priori ZWD.In a first stage, two different sources of GNSS troposphere products are compared to VLBI troposphere estimates in a period of 5 years. The solution with the best agreement to VLBI results is injected in the VLBI analysis as a priori ZWD value and is compared to other options to model a priori ZWD. The dataset used for this empirical analysis consists of the six CONT campaigns.It has been found that modelling a priori ZWD has no significant impact either on baseline length and coordinates repeatabilities. Nevertheless, modelling a priori ZWD can change the magnitude of the estimated coordinates a few millimeters in the up component with respect to the non-modelling approach. In addition, the influence of a priori ZWD on Earth Orientation Parameters (EOP) and troposphere estimates —Zenith Total Delays (ZTD) and gradients—has also been analysed, resulting in a small but significant impact on both geodetic products.